Posts

As America begins its long overdue reopening, my experiences over the last few weeks are indicating what the near future is going to look like in our “New Normal”, and I am sooooo over it already. Here are my top five reasons why:

  1. Restaurants

My wife and I were eager to get back out to our favorite local pub and grill, and got the opportunity last week during their grand reopening. Of course, everyone was masked up and customers were social distanced operating at 25% of capacity, but the biggest change was on the table, which was bare. All the condiments were removed and if you wanted catsup, mustard, salt or pepper we were given a single serving in a sealed cup. Our silverware was plastic and delivered in a sealed pouch like you get with a McDonald’s breakfast. For some reason the beer and drinks were still served in real glasses, not sure why these can be adequately washed but not silverware.

  1. Travel

I took my first air travel since January the end of May and went through three different airports; everything was closed in 2 of the 3 except a couple of the news stores where I could buy a book, magazine or some snacks. The third had a couple of bars open and Starbucks. Just when I though the offerings on the plane could not get any more spartan, we were offered a can of water (didn’t even know water came in cans!) and a small pretzel pack. No soft drinks, and most importantly, no alcohol.

My hotel was no better, with its restaurant and convenience store closed, but once again their Starbucks was open. Of course, all the neighboring restaurants were either closed or only doing pickup. I ended up doing a DoorDash delivery and was able to purchase an $8 beer at the hotel front desk to take to my room. I had another surprise the next evening when I returned to the hotel and found that my room had not been refreshed. I tried to call the front desk to inquire about it, but the room phone had been disconnected. So, after a visit to the lobby for new towels and in-room coffee pod replenishment, the hotel manager informed me that these were all Covid-19 precautions the hotel had put in place. This was a major 4 Star hotel, not your average Motel 6.

  1. Haircuts

Now I am a pretty easy-going guy and doing without a haircut was more of an inconvenience, but for my wife and daughter, not being able to do their monthly hair and nails has been an extremely painful experience. I was finally able to get my first haircut in over 3 months, and not a day too soon as my hair was approaching high school length. In fact, my wife told me that I looked a lot like disheveled scientist Doc Brown from Back to the Future fame. I had tried to make an appointment via my app the prior three days with no success as the wait time was always over 4 hours by the time I checked. So, I finally set my alarm for five minutes before they opened and submitted my “online check-in” immediately and was booked with a 43-minute wait. I continued to watch the app and was amazed as the wait jumped to 87 minutes in three minutes and continued to escalate from there.

When I pulled up about five minutes early for the appointment, there was a masked greeter standing outside to again “check me in” and I was told to wait in my car until someone else finished and left. Everyone in the salon was masked up, as was I, and it stayed on the entire time until she trimmed my sideburns, in which case I was instructed to unhook my mask from my ears and hold it in place while they trimmed my sides. The services were basically unchanged, except at the very end when my stylist said, “I have to send you out a bit damp because they took our hair dryers away.” I guess they didn’t want to be blowing around all the potential Covid-19 air all over the place.

  1. Masks

I hate masks. During vacation five years ago, a mosquito bite I received at a very nice Mexican resort has left me with a compromised immune system. As such, I am in the “high risk” category and will be wearing a mask for the foreseeable future. We have purchased a plethora of styles from Amazon, eBay and Etsy; my wife and I even tried to make our own out of some excess denim we had laying around (not advisable).

Side note: I was in the Home Depot recently (see Reason No. 1 below) waiting to return an item and standing on the dot signifying the appropriate social distance from the next customer, when the guy in front of me, both of us wearing masks, turned to me and said “Do you know what 6 feet is?” I bit my tongue and resisted the urge to reply “2 yards” and politely backed up the 4 inches I was apparently short.

Through all this I have yet to find one that doesn’t make me look like Alfred E. Newman. They are hot, uncomfortable and not very attractive. Every time I complain about the mask or other lifestyle changes I have had to make, my wife reminds me: “Honey, this is just our new normal”. She’s right of course, but it doesn’t keep me from wanting to scream.

  1. Survival (of Covid) is not mandatory

As America, and the world, opens back up not everyone will. The sad truth is that many, many businesses did not survive the “safer at home” business shutdown imposed by overreaching local governments. The definition of “essential business” confounds me as I could go to the Home Depot or Liquor store throughout the shutdown, but churches, service providers and non-grocery stores were ordered closed. I have published two articles over the years on a Wisconsin small business success story called The Barbershop. Having multiple locations state-wide, The Barbershop caters to men and was the poster boy for exceeding customer expectations. I drove by my local shop the other day only to find that they were out of business; they did not survive Covid. They are not alone, and we will quickly discover just how much our booming business economy will have changed from just a few short months of insanity.

Let’s get back to our “Old Normal”

People are smart. Way smarter than the politician in some remote office making decisions to shutter businesses and destroy jobs, all while still getting paid themselves. Let the people decide for ourselves; people in high risk categories like myself are free to wear masks, social distance and stay home if they choose. If they choose. My clients, most of whom have fortunately been able to continue working because of their MilAero or ventilator work, have already made adjustments in their business practices to keep their employees safe. They have updated their Business Continuity Plans to put in place provisions for the next Bio/Chemical threat. We have weathered other pandemics, some worse than this. People are smart; it’s time to get back to work. I’ll end by stealing a line from one of my favorite songs, Aaron Lewis’ Country Boy:

“Now two flags fly above my land

That really sum up how I feel

One is the colors that fly high and proud

The Red, the White, the Blue

 

The other one’s got a rattlesnake

With a simple statement made

‘Don’t tread on me’ is what it says

And I’ll take that to my grave”

 

Contact me for all of your quality system needs

Steve@tracQMS.com

920-841-3478

Recently Steve Williams was interviewed by the iConnect007 Editorial Team on Emotional Manufacturing Intelligence; read the interview here http://iconnect007.uberflip.com/i/1259453-pcb007-june2020/30 and see why Williams feels EMI is more important than IQ when it comes to guiding manufacturing thinking and behavior.

Contact Mr. Williams for more information on EMI and all of your quality management needs.

920-841-3478

Steve@tracQMS.com

Part 2 continues with tips and techniques to minimize audit findings and maximize audit success. Read here http://iconnect007.uberflip.com/i/1248324-pcb007-may2020/86

Contact me ASAP to start training your staff on these Guerrilla Tactics

Steve@tracQMS.com

920-841-3478

Would you like to have better success during customer and 3rd party quality systems audits? Read this multiple part series for tips and techniques to minimize audit findings and maximize audit success. Read here http://iconnect007.uberflip.com/i/1221561-pcb007-mar2020/78

 

Contact me ASAP to start training your staff on these Guerrilla Tactics

Steve@tracQMS.com

920-841-3478

Read my latest article written with supply chain expert Fane Friberg on Page 50 of the April PCB007 magazine. Read it here http://iconnect007.uberflip.com/i/1236528-pcb007-apr2020

Then call me.

920-841-3478

American Standard Circuits Introduces new book: Fundamentals of Printed Circuit Board Technologies

Steve Williams talks with Co-Author Anaya Vardya CEO and President of American Standard Circuits about his new book the Fundamentals of Printed Circuit Board Technologies, the newest and most comprehensive of short Printed Circuit Board books.

 

Steve: First question Anaya; There are already a number of books on PCB technology, why did you write this one?

Anaya: The motivation for writing this book came from our customers, who are always very surprised at the complexity of our processes when they visit for a plant tour or audit. We feel it is critical that our customers are educated on the state of the art of printed circuit board fabrication. Fully understanding the processes will help to avoid over, or under, engineering a design and assure that it is manufacturable.

Steve: Why is it different from some of the other books available today?

Anaya: Printed circuit board fabrication is complicated, and we wanted to explain this complexity in a way that can be easily understood by not only engineers and designers, but also by the average person working out on the shop floor. We also wanted to craft more than another book on the basis of PCB fabrication, so we included a number of advanced technology processes that may not be covered by other books.

Steve: Can you talk about some of the extra features that you’ve added to the book?

Anaya: Sure, the advanced technology I mentioned includes topics like HDI (high density interconnect), Flex/Rigid-Flex, Controlled Impedance, RF/Microwave, RF Thermal Management and Thermal PCBs. We also added in a chapter on what customers can provide the fabricator to make sure they receive an accurate quote. This is a much larger issue than most people would suspect, and one that can be easily fixed with a little education on what exactly is needed.

Steve: This is your third book, and I happen to know that there is a fourth in the works. ASC is quickly becoming known as the industry expert in a number of technologies. Are the books part of a larger strategy?

Anaya: You could certainly say that. We feel that it is critical to educate our customers, and potential customers, in the design and manufacturing considerations of advanced technology PCB technology.

Steve: Who is the book targeting? Who is it written for?

Anaya: The short answer is anybody in the industry. More specifically, it was written to target OEMs, ODMs and Contract Manufacturers; basically, anyone that is designing printed circuit boards. We also feel this book would be beneficial to anyone that is working in the industry, especially people that are just entering it.

Steve: When will be the book be available?

Anaya: Our targeted launch date is Tuesday March 31, 2020.

Steve: Is this an e-book or a print book?

Anaya: It is a free e-book.

Steve: Will a print copy be available in time?

Anaya: Yes, there will eventually be a printed version of the book that you will be able to get from us.

Steve: How can people get a copy of the book?

Anaya: The book can be downloaded directly from our website at https://www.asc-i.com/fundamentals-pcb-tech/

Steve: Is it available to anyone?

Anaya: Of course!

Steve: Any last comments

Anaya: Yes absolutely. We spent a lot of time writing this book in the hopes of giving back to an industry that has been very good to us. We sincerely hope that everyone who downloads and reads it from PCB designers, to manufacturing people, to engineers, to owners, to investors and to buyers and anyone else who needs to know more about printed circuit boards and how they are fabricated. We look forward to getting feedback from people who read the book. Our hope is that it becomes required reading to anyone in our business whether they are twenty-five-year veterans or new to our industry.

  

Meet the Co-Author

Anaya Vardya has over 35 years in the electronics manufacturing business and is currently the President & CEO of American Standard Circuits, Inc. Anaya was previously COO of Canadian based Coretec Inc. and Sr. VP Operations of Merix (both now part of TTM). He was also the Corporate Development Manager at Continental Circuits. Prior to that he had a variety of management and non-management positions in IBM Endicott and IBM Austin. Anaya also has a master’s in chemical engineering from the University of Cincinnati and a Bachelor of Technology from the Indian Institute of Technology (Bombay).

About American Standard Circuits

American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits’ services or to ask one of their technology experts a question go to www.asc-i.com.

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:

The Printed Circuit Board Designer’s Guide… to Fundamentals of RF/ Microwave PCBs

The Printed Circuit Designer’s Guide to… Flex and Rigid-Flex Fundamentals

 

Contact Steve for your Quality needs or to set up your own Interview

920-841-3478

Steve@tracQMS.com

 

PRESS RELEASE

The Right Approach Consulting

March 4, 2020

Milwaukee, WI

 

HT Pho-Tronics receives MIL-PRF-31032 Certification

I am extremely proud to announce that client HT Pho-Tronics has received certification to MIL-PRF-31032 from the DLA (Defense Logistics Agency Land and Maritime). The company had long held the MIL-PRF-55110 certification, which has been replaced by MIL-PRF-31032. This certification adds to the company’s other QMS merit badges of ISO 9001 and AS9100. Unlike the ISO and AS certifications that focus on the quality management system, MIL-PRF-31032 is a printed circuit board performance certification concerned with manufacturing and process control, testing and reliability. The management team and workforce were heavily involved in the transition and were a key component of the success of the project. A heartfelt thanks & congrats to all!

About HT Pho-Tronics

Pho-Tronics was founded in 1962 as a privately held family owned and operated business and has recently been acquired into the HT Global Circuits family of printed circuit board factories. HT Pho-Tronics has been manufacturing high-reliability, complex printed circuit boards for over 50 years in Milwaukee, Wisconsin for the aerospace, military. Industrial, medical and commercial industries. Their 60,000 sq. ft. facility was custom built in 1980 for the specific purpose of manufacturing cost effective printed circuit boards. Product excellence Is achieved through a dedication to continuous process improvement through lean manufacturing principles, SPC and advanced root cause analysis.

For more information go https://www.htglobalcircuits.com

Please reach out and contact me to start your own QMS success story!

Steve@tracQMS.com

920-841-3478

In our never-ending endeavor to bring value to our customers, TRAC has just added eCommerce (secure SSL transactions) to our website at www.tracQMS.com/shop via PayPal. You do not need to have a PayPal account to make a purchase.

Currently available are Steve’s first five books including the newly released “Notorious”:

  • Notorious: Business Lessons from History’s Most Ruthless Leaders (Hardcover-Free Shipping)
  • A Common Sense Guide for Implementing ISO (eBook-Immediate Download)
  • Lean in Plain English (eBook-Immediate Download)
  • Quality 101 Handbook (Hardcover-Free Shipping)
  • Survival is not Mandatory: 10 Things Every CEO Should Know about Lean (eBook-Immediate Download)

Save 15%

To thank you for your support, through the end of June customers will receive a 15% discount on all books by entering “June15%” in the Coupon Code box during checkout. During this time all hard cover orders will also receive a free personalized autograph.

Available Soon

  • ISO 9001 2015 & AS9100D 2016 Training Materials
  • Internal Auditor Training Certification Course
  • Top Management ISO 2015/AS9100D Training & Awareness presentation
  • Employee ISO 2015/AS9100D QMS Awareness Training Module

Contact me for a free 30-minute QMS consultation to discuss how I can help your company simplify your Quality Management System and turn it into a competitive advantage. Guarenteed!

 

Steve@tracQMS.com

920-841-3478