Posts

TRAC Celebrates Tenth Anniversary

First, I would like to thank the 50+ clients that have believed in my company and enabled me to keep the business going strong heading into year 11. A special thanks to the number of customers that have been with me in various capacities since day one; your loyalty is greatly appreciated. I am also proud to announce a 100% certification track record with my clients across the international standards of AS9100/ISO 9001, ISO 13485, ISO 14001, ISO 45001, IATF 16949, and MIL-PRF-31032.

The company was founded September 30th, 2013, so while the actual 10-year anniversary was last September I am extending the celebration as there will be a special anniversary offer extended to all of my clients over the past 10 years. Separate emails will be sent out to these clients with details, but a summary of the offer is outlined below.

 

10-year QMS Upgrade

Every year I make changes to my core Quality Management System that improves, simplifies and increases efficiency. The system is also updated based on the constantly changing auditor preferences and interpretations of the standard(s). This will be a one-time QMS upgrade that incorporates all the improvements over the past 10 years and that can be accomplished over a one-month period via onsite and online meetings, including training to the new upgrades. Typical results are a 40-50% reduction in procedures, forms, tasks, etc., with an ROI of only 6-months or less. The number of clients in any given month will be limited to allow appropriate time to each client, but the offer will  be extended as many months as needed to accommodate all that are interested.

Once again, many thanks to my clients in helping to achieve this milestone, and I look forward to the next ten!

Steve

 

Contact me for all your quality needs

Steve@tracQMS.com

920-841-3478

/by

Press Release: Elite RF receives ISO 9001 2015 Certification

PRESS RELEASE

The Right Approach Consulting

March 5, 2024

Hanover Park, IL

Elite RF receives ISO 9001 2015 Certification

I am proud to announce that client Elite RF, an industry-leading RF amplifier and generator manufacturer, has received certification to ISO 9001: 2015 from certifying body IAPMO SCB. The entire management staff put in a tremendous amount of work to make this certification happen, as evidenced by receiving zero findings in their initial certification audit. A special shout out to Deep Patel, VP of Operations, for spearheading the project internally and inspiring a quality culture throughout the organization.

Ami Patel, Chief Administrative Officer & Partner, stated: “Quality is important to us, and getting ISO 9001 certified validates Elite RF’s commitment to maintain a healthy quality system and assure we meet all customer requirements. Customer satisfaction is our #1 priority as stated in our Quality Policy, and ISO will help us hold that promise to our customers. Receiving ISO certification will help our customers know they are in good hands when ordering RF amplifiers or generators from Elite RF. Also, special thanks to Steve Williams of TRAC  for his guidance through our ISO journey.”

About Elite RF

Elite RF has a profound understanding and years of experience in RF/microwave power amplification technology. They focus on 3 product categories – RF Power Amplifiers, Solid-State High-Power Microwave Generators, and RF Ablation Medical Devices, as well as custom RF solutions. The company works diligently toward meeting the needs of its clients in industries such as medical devices, aerospace, military, quantum computing, particle technologies, communication, plasma-based applications (such as lab-grown diamonds, and semiconductor processing) plus many more. Please reach out to them at sales@eliterf.com to discuss your RF/microwave product specifications and they will closely collaborate with your team to develop your idea into a working product.

For more information go to: http://www.eliterfllc.com

Contact Steve for all of your QMS needs.

Steve@tracQMS.com

920-841-3478

/by

Alloy Products Corp. Receives ISO 14001: 2015 Certification

PRESS RELEASE

The Right Approach Consulting

July 18, 2022

Waukesha, WI

Alloy Products Corp. Receives ISO 14001: 2015 Certification

I am proud to announce that client Alloy Products Corp. (APC) has received certification to ISO 14001: 2015  for Environmental Management from registrar TUV. This adds to the company’s certification to ISO 9001: 2015. President Betsy Bear-Hoff created and chaired an environmental “dream” team of Todd Schlicht, Tanya Tavernia, Emily Lynch, Nick Dunne & Ray Woo that were charged with accomplishing this significant task in under two months. The results were a perfect audit! Congrats to the team and appreciation for all the cooperation & hard work.

Bear-Hoff stated:

“Environmental protection and compliance have always been a core strength of APC, but going through the certification process definitely has raised our game and made us a better environmental partner.”

About Alloy Products Corp

A leader in the fabrication of stainless steel and other alloys since 1929, Alloy Products Corp. consistently meets or exceeds the most rigorous industry standards. APC manufacturers portable pressure vessels & fixed pressure vessels manufactured to ASME and UN specifications used in a variety of sanitary, industrial and general purpose applications. The pressure vessels are constructed of stainless steel and other modern alloys. These pressure vessels are designed for dispensing, mixing or storing hazardous, corrosive, high purity or flammable products to 13.8 bar (200 psi). Few manufacturing facilities can match their superior craftsmanship and quality assurance in designing and manufacturing a wide variety of stainless steel pressure vessels and containers.

For more information, they can be reached at 800.236.6603, or through their website https://www.alloyproductscorp.com

Contact me if you want to add ISO 14001 or ISO 45001 to your company, or with any QMS need.

920-841-3478

Steve@tracQMS.com

/by

HT Pho-Tronics receives MIL-PRF-31032 Certification

PRESS RELEASE

The Right Approach Consulting

March 4, 2020

Milwaukee, WI

 

HT Pho-Tronics receives MIL-PRF-31032 Certification

I am extremely proud to announce that client HT Pho-Tronics has received certification to MIL-PRF-31032 from the DLA (Defense Logistics Agency Land and Maritime). The company had long held the MIL-PRF-55110 certification, which has been replaced by MIL-PRF-31032. This certification adds to the company’s other QMS merit badges of ISO 9001 and AS9100. Unlike the ISO and AS certifications that focus on the quality management system, MIL-PRF-31032 is a printed circuit board performance certification concerned with manufacturing and process control, testing and reliability. The management team and workforce were heavily involved in the transition and were a key component of the success of the project. A heartfelt thanks & congrats to all!

About HT Pho-Tronics

Pho-Tronics was founded in 1962 as a privately held family owned and operated business and has recently been acquired into the HT Global Circuits family of printed circuit board factories. HT Pho-Tronics has been manufacturing high-reliability, complex printed circuit boards for over 50 years in Milwaukee, Wisconsin for the aerospace, military. Industrial, medical and commercial industries. Their 60,000 sq. ft. facility was custom built in 1980 for the specific purpose of manufacturing cost effective printed circuit boards. Product excellence Is achieved through a dedication to continuous process improvement through lean manufacturing principles, SPC and advanced root cause analysis.

For more information go https://www.htglobalcircuits.com

Please reach out and contact me to start your own QMS success story!

Steve@tracQMS.com

920-841-3478

/by

QMS or BMS? Well…

Quality Management System

The first thing we need to get straight is that a Quality Management System (QMS) is actually a Business Management System (BMS). Your Quality Management System will encompass every business process from quoting through shipping (and after sale service), so the QMS is not a “quality thing”, it is an “everyone thing”.  I occasionally run into companies that still have the attitude of “we are only doing this to satisfy ISO, there is not much value to the company.”

This is wrong-headed thinking on so many levels.The true benefits of an ISO system are that it should be used to run the business. The process metrics established for ISO should be discussed at every production and managers meeting. Internal audits should be used to improve every process on an ongoing basis. Customer feedback should drive organizational improvement, and so on. In fact, I would be hard-pressed to find a single requirement of ISO that just doesn’t make good business sense.

The ISO powers that be have emphasized this point with the 2015 revision by requiring top management to be fully engaged in the entire system and not just their own sandbox. This is a good thing.

Contact TRAC

Give me a call to help turn your QMS into a BMS!

920-841-3478

/by